How can a high-efficiency thermal storage system using microencapsulated phase-change materials (PCMs) improve the energy efficiency of ondol heating?

In this blog post, we will examine the principles of traditional ondol heating and phase-change material (PCM) thermal storage, explore methods for microencapsulating PCMs and applying them to building materials, and discuss the potential for developing them into a high-efficiency thermal storage system.

 

Ondol and the Need for Thermal Energy Storage

In South Korea, unlike the air-heating methods used overseas, ondol—a traditional heating system that transfers heat through the floor—has been widely used. Ondol is known to be an effective method for maintaining indoor temperatures by transferring and accumulating heat through the floor. However, because it consumes a significant amount of energy for heating, it is necessary to utilize technologies that store and release heat more effectively in order to improve a building’s energy efficiency. Currently, energy for heating and hot water remains one of the largest energy uses in the residential sector in South Korea, and as building insulation performance and heating technologies advance, the structure of energy consumption is also changing. Therefore, research is ongoing to efficiently utilize the energy required for heating by combining the advantages of traditional ondol with modern thermal energy storage technologies.
Materials capable of storing heat using latent heat are called phase change materials (PCMs), and they are being researched as important materials for thermal energy storage in buildings. While heat transfer systems in buildings primarily rely on media such as water or air, phase-change materials can store large amounts of thermal energy within a relatively constant temperature range because they absorb or release latent heat during phase transitions between states such as solid and liquid. In other words, even when the same amount of thermal energy is absorbed or released, PCMs utilize not only sensible heat but also latent heat; therefore, they can store thermal energy while minimizing temperature fluctuations more effectively than conventional building materials. These characteristics can be leveraged to mitigate fluctuations in indoor temperature and enhance the thermal stability of buildings. However, conventional PCMs have the limitation of low thermal conductivity, which restricts their ability to rapidly transfer or recover heat; various studies are currently underway to improve this characteristic.

 

Types and Characteristics of Phase Change Materials

Phase change materials can be broadly categorized into organic and inorganic types. Organic phase change materials generally offer the advantages of being relatively chemically stable, having low corrosiveness, and being suitable for repeated phase changes; however, they often suffer from low thermal conductivity. Paraffin-based materials are a representative example of organic phase-change materials. Inorganic phase-change materials generally exhibit higher thermal conductivity and latent heat than their organic counterparts; however, depending on the specific material, issues such as supercooling, phase separation, corrosion, and reduced stability due to repeated phase changes may arise. Therefore, rather than applying organic or inorganic phase-change materials directly to building materials, it is important to select materials suited to the specific usage environment and purpose, and to employ technologies that address issues such as leakage, volume changes, and thermal and mechanical stability.
To overcome these limitations of PCMs and utilize them as efficient thermal storage building materials, it is necessary to consider not only high latent heat but also appropriate thermal conductivity, chemical stability, durability against repeated phase changes, and compatibility with other building materials. In particular, PCMs that undergo a phase change from solid to liquid may leak into the interior of building materials because they become liquid during the melting process. Furthermore, since their volume may change during the phase change process, a structure capable of controlling these issues is necessary for long-term, repeated use. For these reasons, encapsulation technologies—such as microencapsulation—are being utilized as key methods when applying PCMs to building materials.

 

Microencapsulation Process for Phase-Change Materials

To address these issues, an encapsulation process is required in which the PCM is formed into a core consisting of fine particles or droplets, which is then surrounded by a shell made of polymer or inorganic materials. This is referred to as the microencapsulation process for phase-change materials. Microencapsulation generally consists of two steps: dispersing the PCM into fine particles or droplets, and forming a protective shell around them. Various methods exist for forming the shell, including suspension polymerization, emulsion polymerization, interfacial polymerization, condensation polymerization, coacervation, and the sol-gel method; the appropriate method is selected based on the type of PCM and the desired characteristics of the capsule. When the microencapsulated PCM produced in this way is mixed into or applied to building materials such as concrete, mortar, gypsum board, and wall structures, it can enhance the thermal energy storage capacity of these materials while preventing PCM leakage.
There are many factors to consider during the microencapsulation process. The particle size and shell thickness of the capsules, the PCM content, the mechanical strength and thermal stability of the shell material, and the chemical compatibility between the PCM and the shell all influence the final performance. As indicated in the original text, certain studies have suggested that capsules with particle sizes in the tens of micrometers, thin shells, and a high PCM mass fraction form stable structures; however, these values do not apply uniformly to all PCMs and encapsulation processes. In fact, the appropriate size of microcapsules and shell thickness depend on the PCM used, the shell material, the manufacturing method, the building materials to which they are applied, and the required thermal and mechanical performance. Therefore, to obtain highly efficient thermal storage materials, it is important to identify the optimal composition and manufacturing conditions suited to the intended application rather than applying a single, specific set of conditions.
Furthermore, in building materials that utilize latent heat, the thermal stability and mechanical durability of the capsules are critical. Since the PCM, which constitutes the core of the capsule, may undergo volume changes during the phase change process, the shell surrounding it must be able to withstand repeated expansion and contraction. To achieve this, the shell must possess sufficient mechanical strength while also having appropriate thermal properties to allow heat to transfer smoothly between the PCM and the external environment. Since the suitable shell materials and manufacturing conditions may vary depending on the type of PCM, it is important to design a capsule structure specifically suited to a given PCM.
If the capsule shell does not provide sufficient thermal and mechanical stability, cracks or breakage may occur during repeated heat storage and release cycles, potentially causing the PCM to leak. Such damage can compromise the thermal storage performance and long-term durability of building materials.

 

Combining Microencapsulated PCM with Ondol

Microencapsulation technology for phase-change materials (PCMs) and its application to building materials continue to be studied as one of the methods for enhancing the thermal energy storage performance of buildings. By mixing microencapsulated PCM into building materials, the PCM’s ability to store and release heat through phase changes can be utilized in building components such as walls and floors. In particular, combining the ondol system—which transfers heat through the floor—with building materials that have heat storage capabilities allows for a design that more effectively stores heat supplied during the heating process and releases it when needed. This has the potential to mitigate sudden changes in indoor temperature and utilize the energy required for heating more efficiently. However, since the actual energy-saving effects depend on factors such as the type of PCM, its phase-change temperature, latent heat, microcapsule concentration, the thermal properties of the building materials, the building’s insulation performance, climate, and heating operating conditions, it cannot be assumed that a certain level of energy savings will automatically result from the application of microencapsulated PCM alone.
Therefore, future ondol heating systems may evolve by combining traditional floor heating methods with thermal energy storage technologies, such as microencapsulated phase-change materials. If microencapsulated phase-change materials are appropriately incorporated into the building materials used for ondol, they can help store the thermal energy supplied during the heating process and release it when needed, thereby reducing fluctuations in indoor temperature. For this technology to be applied to actual buildings, factors such as thermal storage performance, durability against repeated phase changes, the strength and workability of building materials, fire safety, performance changes over long-term use, and cost-effectiveness must all be evaluated together. If such research and technological development continue to advance, South Korea’s traditional ondol heating system has the potential to evolve into a more efficient building thermal management system by integrating with modern thermal energy storage technology.

 

About the author

Cam Tien

I love things that are gentle and cute. I love dogs, cats, and flowers because they make me happy. I also enjoy eating and traveling to discover new things. Besides that, I like to lie back, take in the scenery, and relax to enjoy life.