In this blog post, we’ll explore the color and melting point of gold, the luminescence of quantum dots, and the operating principles of photocatalysts based on the surface and quantum effects of nanoparticles, to understand why the properties of the same material can vary depending on its size.
- Introduction
- The Smaller It Gets, the Greater the Influence of the Surface
- Small gold particles also melt differently
- When the space for electrons to move is reduced, the color of light also changes
- Red gold nanoparticles and quantum dots operate on different principles
- Tunneling serves as a tool for observing the small world
- Photocatalysts convert light energy into surface reactions
- Even in very small amounts, gold exhibits different electronic and magnetic properties
- Nanotechnology designs size, surface, and environment together
Introduction
It’s easy to think of gold as golden in color. However, if gold is made into particles measuring tens of nanometers and evenly dispersed in a liquid, it can appear red or purple. This is not because the gold atoms have been replaced by other elements, nor is it necessarily due to the addition of a dye. It is the result of changes in how the particles respond to light as their size and surrounding conditions change. Small gold particles can even melt at lower temperatures than a large chunk of gold. In a sense, the property of matter that we are familiar with hides a condition known as “size.”
“Nano” means one-billionth, and 1 nanometer (nm) is one-billionth of a meter. Assuming a sheet of paper is about 0.1 millimeters thick, that corresponds to 100,000 nm. Nanotechnology generally refers to the science and engineering of understanding and controlling materials at scales ranging from about 1 to 100 nm, and utilizing the properties that emerge at these scales. However, 100 nm is not a threshold that suddenly changes the properties of all materials. The size at which certain changes become pronounced depends on the material, its structure, and its surface condition.
There is a famous question that illustrates the possibilities of the microscopic world: Could the contents of an entire encyclopedia be recorded on the head of a pin? Physicist Richard Feynman posed this question during a lecture at the California Institute of Technology in 1959 and discussed the possibility of manipulating matter at the atomic level. Today, the issues addressed by nanotechnology go beyond simply how much can be packed into a small space. The core questions are: what changes when matter is made smaller, and how can we utilize those changes?
The Smaller It Gets, the Greater the Influence of the Surface
The first reason the properties of nanoparticles change is that the proportion of atoms on the surface increases relative to the total number of atoms. While atoms inside a material are surrounded by other atoms on all sides, surface atoms come into contact with air, liquids, or other materials from the outside. Consequently, surface atoms have a different bonding environment than internal atoms and have more opportunities to react directly with external substances. As particles become smaller and the proportion of surface atoms increases, these differences have a greater impact on the overall properties of the particle.
This relationship is easy to understand if you imagine a cube. If the length of one side is reduced to one-tenth, the surface area of a single particle becomes one-hundredth, and its volume becomes one-thousandth. Although the surface area itself decreases, the volume decreases even more rapidly; therefore, the surface area per unit volume increases tenfold. If you divide the original cube into 1,000 such small cubes and place them separately, the total mass of the material remains the same, but the total surface area exposed to the outside increases tenfold. This demonstrates that even with the same amount of material, the smaller it is divided, the larger the surface area exposed to the outside environment becomes.
A concept frequently used in this context is “specific surface area.” It generally refers to the surface area per unit mass; if particles have the same shape and density and their surfaces are fully exposed, the smaller the particles, the greater the specific surface area. This is also a key reason why nanoparticles are used as catalysts. A catalyst is a substance that helps chemical reactions proceed more rapidly; in solid catalysts, the process by which reactants adhere to the surface and react is crucial. If a given mass can provide a larger reaction space, the material can be used more efficiently.
However, a large surface area does not automatically guarantee excellent catalytic performance. The results depend on whether reactants can access the surface, how surface atoms are arranged, and which molecules cover the surface. When small particles clump together, the surface area available for the reaction may actually decrease. Therefore, when designing nanocatalysts, it is necessary to consider not only particle size but also the surface condition and the degree of particle dispersion.
Small gold particles also melt differently
The influence of the surface is also evident in the melting point. When certain metals, including gold, are made into nanoparticles, they can melt at lower temperatures than when they are in the “bulk” state—the large chunks we encounter in everyday life. Which state—solid or liquid—is more stable depends not only on internal energy but also on the energy generated at the interface between the surface and the surrounding material. The contribution of the surface, which was relatively small in bulk materials, becomes difficult to ignore in nanoparticles.
The melting process itself is not simple either. In 2019, a research team involving the University of Birmingham and Swansea University in the UK observed gold nanoclusters on a carbon support and confirmed that while the surface melted first, the core retained its crystalline structure. When the temperature was raised further, the core also melted. Here, a nanocluster refers to a very small aggregate formed by a group of atoms. This experiment demonstrates that small particles do not always melt entirely at once.
However, this does not mean that all materials melt at room temperature once they reach a size of a few nanometers. The melting temperature and process depend on the type of material, the structure and shape of the particles, the substances attached to the surface, and the interactions with the supporting substrate. To explain the thermal properties of nanoparticles, one must ask not only “what material is it?” but also “how small is it and in what environment is it located?”
When the space for electrons to move is reduced, the color of light also changes
Another important principle that alters the properties of nanoparticles is the quantum effect. Electrons do not behave solely like tiny balls; they also exhibit wave-like properties. When the space in which electrons can move becomes sufficiently narrow, the possible states and energies of the electrons within that space can change. This is called “quantum confinement.” Although quantum mechanics is not a law that applies exclusively to the nanoworld, as structures become smaller, its effects can manifest as visible differences, such as changes in a material’s color.
Semiconductor quantum dots are a prime example of this principle in action. When a semiconductor absorbs light energy, electrons jump to a higher energy state, leaving a vacancy in their original position. Since this vacancy behaves like a positively charged particle, it is called a “hole.” In quantum dots, the movement of electrons and holes is restricted in all three spatial directions. When the crystal becomes small enough, the gaps between the energy states they can occupy also change.
These energy differences are crucial when absorbing or emitting light. For semiconductor quantum dots with the same composition and similar structures, the energy gaps associated with light absorption and emission generally increase as the size decreases. Since the energy of a single photon increases as the wavelength of light decreases, light from smaller quantum dots tends to shift toward shorter wavelengths, while light from larger quantum dots tends to shift toward longer wavelengths. Within the visible light spectrum, this can be thought of as a shift toward the blue end and the red end, respectively. However, not all quantum dots of the same size emit the same color, as the material’s composition and internal structure also determine the color.
By utilizing this property, it is possible to design quantum dots made from the same type of semiconductor material to emit light of different colors simply by adjusting their particle size. The luminescent properties of quantum dots are already being utilized in displays and are also being researched in the fields of sensors and biomedical imaging. The key is not simply creating small particles, but controlling their size and structure to achieve the desired energy states.
Red gold nanoparticles and quantum dots operate on different principles
Although the color change in gold nanoparticles is also related to size, the primary mechanism observed in gold particles measuring tens of nanometers differs from that of semiconductor quantum dots. Metals contain electrons that can move relatively freely. When light strikes a gold nanoparticle, these electrons vibrate collectively in response to the light’s electric field. The phenomenon in which light interacts strongly under specific vibrational conditions is called “surface plasmon resonance.”
Because of this phenomenon, gold nanoparticles strongly absorb or scatter light of specific wavelengths. Scattering is the phenomenon in which light changes its direction of travel as it interacts with the particles. When light passes through a liquid containing dispersed particles or when the composition of the light scattered from the particles changes, our eyes may perceive red or purple hues instead of gold. Even though gold atoms are all the same, the way they respond to light changes when they are aggregated into particles.
The color of gold nanoparticles is not determined by size alone. Resonance conditions also vary depending on whether the particles are spherical or elongated, how far apart they are, and the type of liquid they are suspended in. Even particles of the same size can exhibit different colors depending on whether they are separated or clustered together. Therefore, one cannot definitively determine the size of a particle based solely on its color.
When understanding the color of semiconductor quantum dots, the key lies in the changes in energy states resulting from spatial confinement, whereas the key to understanding the color of typical gold nanoparticles lies in the collective oscillations of electrons. In both cases, size alters the optical properties, but not all nanoparticles that change color can be called quantum dots.
Tunneling serves as a tool for observing the small world
A phenomenon that frequently appears alongside quantum confinement is “quantum tunneling.” Although both phenomena are explained by quantum mechanics, they address different issues. While quantum confinement relates to the limitation of the space in which an electron can reside, tunneling relates to the possibility of an electron moving across a barrier.
An ordinary ball cannot roll over a hill unless it has enough energy to do so. Even a particle described by classical mechanics cannot pass through an energy barrier higher than its own energy. However, the wave function representing the electron’s state can extend from one side of a finite barrier to the other. The wave function is used to calculate the probability of finding the electron at a given location. Tunneling occurs when there is a probability of finding the electron on the other side of the barrier. In particular, if the barrier is thin enough, this effect can become significant enough to be measurable. This does not mean that the electron creates a hole in the barrier or suddenly gains additional energy to cross it.
The scanning tunneling microscope (STM) utilizes this phenomenon. When a very sharp probe is brought close to the surface of a sample through which electricity can flow and a voltage is applied, a tunneling current can flow even without direct contact between the probe and the sample. The current is highly sensitive to the distance between the two. Therefore, by moving the probe over the surface while measuring the current, or by adjusting the probe’s height to maintain a constant current, it is possible to obtain surface information at the atomic level. However, the images produced in this way reflect not only the surface’s topography but also the state of the electrons. In other words, this is a different kind of information from a photograph taken by magnifying the surface with the naked eye.
Photocatalysts convert light energy into surface reactions
Titanium dioxide (TiO₂) photocatalysts are an example where the roles of both the surface and electrons are revealed. A photocatalyst is a substance that absorbs light to catalyze chemical reactions. In typical titanium dioxide, when light with sufficient energy—such as ultraviolet light—is absorbed, electrons are excited to a higher energy state, leaving behind holes. When these electrons and holes reach the surface and react with oxygen or water, reactive species that readily react with other substances can be formed. This process contributes to the decomposition of organic matter and the inactivation of microorganisms.
By producing titanium dioxide in the form of small particles, the surface area available for contact with the external environment can be increased for a given mass. However, simply increasing the surface area is not sufficient. If the electrons and holes generated by light recombine before they can be utilized in surface reactions, the absorbed energy cannot be harnessed for the desired chemical reaction. Changes in the crystal structure or surface state that occur during the process of particle size reduction also affect performance. Actual photocatalytic reactions are determined by a combination of surface area, charge transport and recombination, particle agglomeration, and the wavelength and intensity of light.
Therefore, the simple rule that “the smaller the particle, the better the photocatalyst” does not hold true. Materials must be designed according to the specific substance to be decomposed, the type of light to be used, and whether the material will be used in water or immobilized on a surface. It is also necessary to verify whether the reactivity observed in the laboratory is maintained at the same level in actual application environments.
The importance of these conditions also extends to safety assessments. The fact that a material effectively induces a useful reaction does not automatically mean it is harmless to humans or the environment. Conversely, one cannot assume that all materials are equally hazardous simply because they are nanoscale. The type and form of the material, its surface treatment, and the route and amount of exposure must all be considered together. Both performance and safety depend on how specific particles actually behave under specific conditions.
Even in very small amounts, gold exhibits different electronic and magnetic properties
Gold is a metal that conducts electricity well when in large chunks. However, in very small gold clusters with few atoms, electrons may exhibit energy levels that are distinctly separated, similar to those in molecules. This differs from the tightly interconnected energy states found in large gold masses. At this scale, the number of atoms gathered, their arrangement, and the molecules bound to the surface significantly influence the electronic properties.
This does not mean that all gold nanoparticles become semiconductors. Rather, it means that gold particles measuring tens of nanometers and gold clusters with few atoms cannot be treated as materials with identical properties. As particles become extremely small, even the plasmon response characteristic of metals, as described earlier, can change. One cannot apply the same electronic properties to particles of all sizes simply based on the element name “gold.”
The role of the surface is also evident in magnetic properties. Bulk gold exhibits “diamagnetism,” a weak response in the opposite direction of an external magnetic field. However, in 2004, a research team involving the Complutense University of Madrid and the Spanish National Research Council (CSIC), among others, reported that gold particles measuring approximately 1.4 nm—whose surfaces were treated with thiol-based molecules containing sulfur—retained a memory of magnetic field changes even at room temperature. This phenomenon, in which the influence of a previous state persists even after the magnetic field is changed, is called “magnetic hysteresis.” In the same study, particles of similar size but coated with other protective materials that interact weakly with the surface exhibited diamagnetism.
These results should not be generalized to mean that “gold becomes magnetic when made smaller.” The key point demonstrated by this experiment is that even particles of similar size can exhibit different magnetic responses depending on the chemical bonds on their surfaces. In the nanoworld, molecules attached to the surface are not merely incidental decorations but become the determining factors of a material’s properties.
Nanotechnology designs size, surface, and environment together
To understand why the properties of nanoparticles change, we must examine the conditions under which atoms and electrons are arranged. As the proportion of surface atoms increases, reactions with external substances and thermal stability can change. When the space for electrons to move is restricted, the allowed energy states and response to light are altered. The color of gold nanoparticles, the luminescence of quantum dots, the melting of metal particles, and the reactivity of photocatalysts are examples of these changes manifesting in different ways.
This principle is applied in the development of displays, semiconductors, catalysts, energy materials, sensors, and drug delivery systems. However, it is important to distinguish between technologies already in use and those still under research. For example, technology utilizing nanoscale drug delivery systems and nanorobots that autonomously navigate the body to diagnose and treat diseases represent challenges of vastly different levels. The fact that we can create tiny materials does not mean that complex functions are automatically achieved.
To achieve the desired functionality, one must determine not only the size but also the shape, atomic arrangement, surface treatment, and operating environment. In nanotechnology, the key question does not end with “How small can we make it?” It extends to “What properties emerge at that scale, and how can we reliably harness those properties?”