Why Ships Right Themselves and the Principles of Ship Stability

In this blog post, we’ll examine the principle behind how a listing ship rights itself in terms of the relationship between its center of gravity and metacenter, and explore how cargo stowage and ballast tank management affect a ship’s stability.

 

The Two Forces That Right a Listing Ship

How does a ship that has listed to one side after encountering waves right itself? It might bring to mind the way a wobbling toy stands back up when you push it and let go, but it’s difficult to explain a ship’s movement solely by its low center of gravity. For a ship floating on water, it’s important not only where the weight is concentrated but also where the water supports the hull. This is because when a ship heels, the shape of its submerged portion changes, and consequently, the location where buoyancy acts also shifts.
To understand this principle, let’s consider a box floating on calm water. The box is subject to the force of gravity pulling it downward and the buoyant force pushing it upward. According to Archimedes’ principle, the magnitude of the buoyant force is equal to the weight of the water displaced by the box. If the box is floating at rest on the water, the total weight of the box equals the buoyant force, so the forces in the vertical direction are in balance.
The points where these two forces act have specific names. The “center of gravity” is the point where the total weight of the box can be considered to be concentrated, and the “center of buoyancy” is the geometric center based on the volume of the submerged portion. Gravity acts downward through the center of gravity, and buoyancy acts upward through the center of buoyancy. If the box is stationary and upright with no external forces causing it to tilt, these two points lie on the same vertical line. In this case, neither force causes the box to tilt to either side.
The situation changes when the box tilts. The lowered side becomes more submerged, while the raised side emerges from the water, altering the shape of the submerged portion and the position of the center of buoyancy. However, if the objects inside the box remain stationary, the center of gravity stays in the same position relative to the box. This does not mean it is fixed in space, but rather that it moves with the box while maintaining its relative position within it.
When the center of buoyancy shifts in this way, a horizontal distance can arise between the two vertical lines along which gravity and buoyancy act. Forces pulling downward and pushing upward from these two separate positions cause the box to tilt. If the direction of this force reduces the tilt, it is called a “restoring moment.” “Restorative stability”—the property of a ship to return to its original equilibrium position when it heels—is based on this restoring moment.
However, a shift in the metacenter does not always cause the ship to right itself. Depending on the relationship between the center of gravity and the metacenter, these two forces may actually increase the heel. This is why the mere fact that a ship has enough buoyancy to float does not guarantee it is safe from capsizing.

 

Stability Analyzed Through the Restoring Arm and GM

The magnitude of the rotational effect that returns the ship to its upright position depends on the magnitudes of the two forces and the distance between their lines of action. The horizontal distance between the lines of action of gravity and buoyancy is called the “restoring arm” or “restoring line,” denoted by the symbol GZ. If we assume that buoyancy and the ship’s weight are in balance in calm water, the righting moment is equal to the ship’s total weight multiplied by the righting arm. Therefore, if two ships of the same weight are heeled at the same angle, the longer the righting arm in the direction that rights the ship, the greater the righting moment.
A reference point called the “metacenter” is useful for examining the behavior of a ship when it is tilted only very slightly. Let’s imagine the cross-section of a ship that is symmetrical from side to side. When a ship that is floating upright tilts very slightly to one side, the metacenter shifts. If you draw a vertical line upward from the new metacenter where buoyancy acts, the point where this line intersects the ship’s centerline—which has tilted along with the ship—can be understood as the metacenter at a small angle. The metacenter is not a device installed inside the ship but a geometric reference point determined by the shape of the hull and its submerged state.
The center of gravity is denoted by G, and the metacenter by M. The vertical distance between these two points when the ship is upright is called the “metacenter height,” or GM. If M is above G—meaning GM is positive—a restoring moment is generated that causes the ship to right itself when subjected to a slight list. This is called “initial righting capacity.” When comparing ships of the same weight and with a small angle of heel, the smaller the GM, the smaller the restoring moment.
Conversely, if M is below G and GM is negative, the upright position is unstable. This means that even a slight heel can cause the ship to list further. However, this does not necessarily mean the ship will capsize immediately. Depending on the hull shape and cargo condition, the ship may achieve a new equilibrium while listing to one side. However, the fact that the vessel has come to a stop while tilted should not be interpreted as a sign that normal stability has been achieved.
It is important not to confuse the center of gravity with the metacenter. A vessel floating on the water’s surface can be stable even if its center of gravity is above the metacenter. This is because, when the vessel tilts, the metacenter shifts, creating a restoring moment that brings the vessel back to an upright position. For small angles of heel, the critical vertical relationship is not between the center of gravity and the center of buoyancy, but between the center of gravity and the metacenter.
GM alone cannot explain safety at all angles of heel. To assess stability at large angles of heel, one must examine the “GZ curve,” which shows how the righting lever changes with angle. The horizontal axis of this curve represents the angle of heel, and the vertical axis represents the righting lever. By examining the curve, one can determine at which angle the restoring effect is greatest and the range over which that effect persists. Initially, the moment that restores the ship may weaken, disappear, or even reverse direction—causing the ship to list further—as the angle of list increases. Furthermore, even if the restoring arm remains positive on the curve, safety must be assessed separately if openings become submerged and flooding begins before that point.

 

Where to Load Cargo and How to Secure It

Stability is not a property that is determined once and for all when a ship is built. Even if the same ship carries the same weight of cargo, stability varies depending on the cargo’s arrangement. If, with all other conditions remaining the same, cargo is moved from a lower to a higher position, the ship’s overall center of gravity rises. Consequently, the GM decreases, and the restoring arm—which helps right the ship at the same angle of heel—also becomes smaller. This is why both the total weight of the cargo and its location must be considered together.
A ship with containers stacked in multiple layers on the deck may look unstable. However, it is difficult to judge the risk based solely on the apparent height. The hull’s shape, the actual weight of each container, the cargo arrangement inside the holds, and the ballast status all affect stability. What matters is whether the required stability is maintained given the ship’s overall weight distribution and loading conditions.
The cargo arrangement that was appropriate at the time of departure must be maintained throughout the voyage. The process of securing or fastening cargo to prevent movement is called “lashing.” When a ship heels, if heavy, unsecured cargo slides toward the lower side, the center of gravity shifts in that direction as well. As a result, the ship may list further or find it difficult to return to its original attitude. Where cargo is loaded and how securely it is secured are interrelated issues.
The problem of the ship sitting too deep in the water due to increased cargo volume must also be considered. The vertical distance from the water’s surface to the reference deck on the ship’s side is called the “freeboard.” If the freeboard decreases, there is a greater risk of waves washing over the deck or water entering through openings such as doors and vents. Therefore, simply lowering the center of gravity does not mean that cargo capacity can be increased indefinitely. Along with weight distribution, one must also consider the depth of submersion, the remaining freeboard, and the risk of flooding.

 

How Water in Ballast Tanks Affects Stability

Ships adjust their draft, weight distribution, and fore-and-aft trim by adding or removing water—known as “ballast water”—from dedicated tanks. Filling tanks located lower on the ship can help lower the ship’s overall center of gravity. However, adding water also changes the ship’s total weight and its shape when submerged. Adding more ballast water does not necessarily make the ship safer.
In particular, one must consider that when tanks are only partially filled, there is space for the water to move around. This is easy to understand if you imagine a tray filled with water being tilted to one side, causing the water to pool on the lower side. When a ship heels, the liquid inside the tanks also shifts toward the lower side, and as the center of gravity of the liquid shifts, the ship’s overall weight distribution changes. This phenomenon, in which the liquid surface moves freely and reduces stability, is called the “free-surface effect.”
Therefore, even if water is loaded in a low part of the ship, the expected improvement in stability may be reduced if the water can move from side to side within a wide tank. When evaluating the free-surface effect, one must consider not only the volume of water but also the tank’s shape, width, internal compartments, and degree of filling. A tank that is completely filled, leaving no room for the water to move, cannot be treated the same way as a partially filled tank.
This phenomenon is not limited to ballast tanks. It also occurs in partially filled fuel tanks or fresh water tanks, as well as in water pooled inside the hull or on the deck. Water that enters the ship does more than simply add weight; as it moves, it can also reduce stability. Managing the condition of the tanks and ensuring that water pooled on the deck drains smoothly are also part of the process of maintaining stability.

 

Stability in Calm Waters vs. Safety in Actual Sea Conditions

The assessment of a ship’s stability in actual sea conditions does not end with simply determining the GM. One must also examine the righting arms at various angles of heel and the range within which their effects are maintained, as well as cargo stowage, lashing, and tank conditions. “Draft”—the depth to which the hull is submerged—and “trim”—the difference in draft between the bow and stern—are also important. To more closely simulate actual operating conditions, one must further consider the effect of wind on the ship’s heel, rolling caused by waves, and the potential for flooding through openings.
The “2008 Intact Stability Code,” adopted by the International Maritime Organization in 2008, contains mandatory requirements and recommendations regarding a ship’s stability when the hull is intact. These mandatory requirements apply to eligible vessels through relevant international conventions. A ship’s stability is assessed based on specified loading and operating conditions, and the captain must verify, using approved stability data, that the actual cargo and tank conditions fall within permissible limits. Even a ship that met the standards during the design phase requires verification if actual operating conditions change.
Movement in waves is difficult to fully explain through calculations based solely on calm water conditions. Even a ship with assured static stability may experience significant rolling depending on the direction and period of the waves, as well as the ship’s speed and course. To address these issues, the International Maritime Organization’s Maritime Safety Committee approved the “Interim Guidelines on Second-Generation Intact Stability Criteria” in 2020. These guidelines were established to evaluate dynamic stability issues arising in rough seas and to review design and operational measures; they were approved as a supplement to existing mandatory standards. Numerical analysis and simulation are also utilized in these evaluations.
The process by which a ship heels and then rights itself involves the interplay of two forces. Gravity acts downward from the center of gravity, while buoyancy acts upward through the metacenter, which shifts depending on the angle of heel. The ship can only recover its attitude if the spatial relationship between these two forces generates a moment that rights the ship. To maintain this capability throughout the voyage, cargo stowage, lashing, and tank management must be tailored to the hull design, and the ship must be operated in accordance with actual wind and wave conditions. Understanding why a ship can right itself ultimately means understanding how the ship’s form, weight distribution, and operation at sea are interconnected.

 

About the author

Cam Tien

I love things that are gentle and cute. I love dogs, cats, and flowers because they make me happy. I also enjoy eating and traveling to discover new things. Besides that, I like to lie back, take in the scenery, and relax to enjoy life.