In this blog post, we’ll examine the low-power technologies that have enabled the advancement of portable electronic devices, including smartphones, and compare analog and digital data transmission to explore how low-power technologies impact the miniaturization of electronic devices and battery life.
Compared to the mobile phones of the past, when they first became widely available, the smartphones we use today are much smaller and lighter, yet they offer far more features. Of course, technological advancements in areas such as CPUs, memory, displays, and batteries have played a major role in this evolution. However, the development of low-power technology is also a key factor that cannot be overlooked. Low-power technology, as the name suggests, refers to technology that reduces power consumption. To understand this in more detail, we need to examine the principles of digital information processing and transmission in electronic devices such as smartphones.
The process of digital information transmission is easier to understand when compared to the analog method. Suppose a person at point A wants to convey the number 8 to a person at point B. Imagine that A fills a bucket with 8 liters of water, carries it to B, and shows the bucket to B as a way of conveying the information. This can be likened to analog information transmission. If the conditions during the journey from A to B are favorable, the 8 liters of water will be delivered intact, and the person at B will accurately know that the number is 8. However, if water spills along the way, the person at B may have difficulty determining whether the bucket contains 7 liters or 8 liters of water. Conversely, if it rains along the way and rainwater mixes with the bucket’s contents, it may become difficult to distinguish whether there are 8 liters or 9 liters. As such, when transmitting information using the analog method, there is a possibility that information may be lost or distorted during the transmission process.
To convey the number 8 digitally, you must first convert 8 into binary. In binary, 8 is represented as 1000. Using the water jug as an analogy, you can define a full jug as 1 and an empty jug as 0. The person at A first fills the jug completely and carries it to B. The person at B then receives the information “1.” Next, they carry the empty bucket to B. The person at B then receives the information “0.” By passing the empty bucket two more times in the same way, the information “1000” is transmitted to B. In this way, when information is represented as 1s and 0s, it is possible to distinguish relatively clearly between a full state and an empty state, even if there are changes along the way—such as spilling a little water or rainwater seeping in. This is the basic concept of transmitting information digitally.
In the example above, a full bucket was represented as 1 and an empty bucket as 0, but in actual electronic circuits, logical states are represented using electrical signals such as voltage and current. In typical digital circuits, signals within a specific voltage range are recognized as logic 1 or logic 0, and electrical energy serves as the medium for information transmission and computation. The key here is not merely to lower the voltage, but to reduce the energy required for circuit switching and the leakage power generated in standby mode while ensuring sufficient noise margin to reliably distinguish between 1 and 0 even at low voltages. In particular, since the dynamic power of CMOS digital circuits generally proportional to the square of the supply voltage, lowering the supply voltage can significantly reduce power consumption associated with switching. However, lowering the voltage excessively can lead to problems with stable signal discrimination and circuit operating speed; therefore, appropriate voltage levels and circuit design are necessary.
In conclusion, low-power technology is not limited to simply “creating devices that distinguish between 1s and 0s at low voltages.” It encompasses a wide range of circuit, device, and system technologies that reliably distinguish logic states even at low voltages while reducing the energy required for switching and leakage power, thereby efficiently utilizing limited battery energy. Lithium-ion batteries, widely used in small electronic devices, have seen steady improvements in energy density since the first commercial products appeared; however, there are limits to significantly increasing both the performance and battery life of portable devices through improvements in battery performance alone. In fact, while the energy density of lithium-ion batteries has improved several-fold compared to early commercial products, this advancement must go hand in hand with improvements in the power efficiency of circuits and devices.
Nevertheless, the ability to create electronic devices today—which offer far superior performance compared to those of decades ago—in even smaller and lighter forms while maintaining long battery life is due to advancements in low-power technology. Low-power technology not only facilitates the miniaturization of batteries and extends battery life but also helps make circuits and power supplies smaller and lighter, while playing a crucial role in reducing the heat generated during device operation. In particular, for portable electronic devices—such as smartphones—where numerous semiconductors and electronic components are integrated into a limited space, the importance of low-power design is growing even more, as both power consumption and heat generation must be managed simultaneously. Therefore, low-power technology can be considered a core technology that goes beyond simply extending battery life to simultaneously enable the miniaturization and high performance of portable electronic devices.