The Art of Interpreting Changes: The Principles of Radio Wave Communication

In this blog post, we’ll follow the process of encoding information into radio waves and interpreting the resulting changes to understand how wireless communication transmits text, voice, and photos.

 

Introduction

How can we send a message to someone far away? While we could visit them in person or send a letter, using a smartphone allows us to send messages and hear the other person’s voice without even moving from where we are. Even though the device in our hand isn’t connected to any communication lines, photos and videos are sent back and forth. What’s happening in that invisible space?
One of the technologies that makes this possible is wireless communication using radio waves. While there are methods of wireless communication that use light, here we will examine radio wave communication, which is used in radios, cell phones, and Wi-Fi. The key to understanding this principle lies in “change.” The sender modifies the characteristics of the radio waves according to the information to be transmitted, and the receiver interprets those changes to retrieve the information.

 

Encoding Information in Changes to Radio Waves

Radio waves are a type of electromagnetic wave in which changes in electric and magnetic fields propagate through space. Electric and magnetic fields represent states in which electric and magnetic forces, respectively, are at work. When explaining radio waves, people often draw wavy lines, but this does not mean that radio waves travel along a path that undulates like a wave. Rather, it is a diagram showing how the electric and magnetic fields change over time or position.
So, what does it mean to embed information in radio waves? Imagine a situation where you’re sending a signal with a flashlight in the dark. You could agree that two short flashes mean “hello,” and one long flash means “wait.” The other person doesn’t just confirm the presence of light; they interpret the pattern of the light turning on and off to understand the meaning. Radio communication is similar in that signals are created and interpreted according to rules shared between the sender and the receiver.
The transmitter modifies the characteristics of the “carrier wave”—the fundamental wave that carries the information—to match the information to be transmitted. This process is called “modulation.” For example, the amplitude of the wave—that is, the size of the oscillation—or the frequency—that is, the number of oscillations per second—can be altered. In the familiar radio broadcasts, AM transmits sound information by varying the amplitude, while FM does so by varying the frequency. The key is that changes corresponding to the information are superimposed onto a steady wave, and the receiver distinguishes and reads those changes. This does not mean that the transmitter must continuously emit radio waves before it even begins sending information.

 

From the Transmitter Antenna to the Receiver Antenna

How does the signal containing information leave the device? When a rapidly changing current generated by the transmitter circuit flows through the transmitter antenna, the antenna emits corresponding electromagnetic waves into space. When these radio waves reach the receiver antenna, a minute electrical signal is generated at the antenna. The receiver circuit receives this signal, extracts the necessary components, amplifies them, and then decodes the information. In essence, the antenna acts as a bridge between the electrical signal and the radio waves traveling through space.
In this process, the receiving antenna does not need to transmit radio waves of the same frequency first. Nor does information pass between the two antennas simply because their radio wave fields overlap. This is why a radio receiver can pick up a broadcast without transmitting radio waves toward the station. If the radio waves originating from the transmitting antenna reach the receiving antenna and the receiving device can distinguish that signal, it can receive the information.
So what does it mean to “tune in” to a radio station? The unit of frequency is hertz (Hz), and 1 Hz means one oscillation per second.
Tuning a radio involves setting the receiver’s circuitry to select the frequency band used by the station you want to listen to from among the various broadcast signals. Here, “band” refers to a specific range of frequencies. Since a signal modulated to carry information does not remain at a single frequency but occupies a specific range, the receiver must be tuned to the range where it can receive that signal. In digital communication, the method of encoding information into the signal and the rules for decoding it must also match.

 

How “Hello” Becomes Text via Radio Waves

Now, let’s imagine sending the text “Hello” from one device to another. The sending device first represents the text as data consisting of 0s and 1s according to established rules. The transmitter converts this data into variations in the radio wave signal, and the transmit antenna broadcasts that signal into space. It is not the characters “Hello” themselves that travel through the air, but rather radio waves that vary according to the data representing those characters.
At the receiving device, this process occurs in the opposite direction. When the receive antenna captures the radio waves as electrical signals, the receive circuitry reads the variations embedded in the carrier wave. This is called “demodulation.” The device then interprets the demodulated results as data and displays “Hello” on the screen according to the rules for representing characters. The antenna alone cannot determine the meaning of the characters. The message is only complete when the antenna, the receiving circuit, and the data-processing device each fulfill their respective roles.
Of course, the actual received signal may be mixed with ambient noise or signals from other transmitters. If the desired signal is too weak or there is severe interference, it is difficult to accurately read the content even if the radio waves reach the receiver. To prepare for such situations, digital communication sometimes includes information necessary to detect or correct errors in the data. In wireless communication, accurately retrieving the original information from the received signal is just as important as transmitting the radio waves over long distances.

 

The Same Principle Behind Text, Voice, and Photos

Although radios and smartphones appear to be different devices, they share the same basic principle of converting changes in radio waves into information. A radio extracts audio information from the received signal and plays it through a speaker. When making a call on a smartphone, the microphone converts your voice into an electrical signal, which the device then processes into digital data for transmission. The recipient’s device plays back the received data as sound. Photos and videos also follow the same process in that their respective contents are represented as data, transmitted, and then reconstructed.
When using the internet on a smartphone, signals are exchanged in this way with nearby Wi-Fi routers or cellular base stations. The information then travels to its destination via the communication network. Therefore, just because a smartphone isn’t connected by a physical cable doesn’t mean every part of the internet connection is wireless. Radio waves play a crucial role in the segment connecting the device to the communication network.
Even in the moment a message appears on the screen or you hear the voice of someone far away, devices are interpreting changes in invisible radio waves. The sender modulates the signal according to the information, and the receiver interprets those changes using the same rules. This clear principle forms the foundation of the wireless communication taking place right in the palm of your hand.

 

About the author

Cam Tien

I love things that are gentle and cute. I love dogs, cats, and flowers because they make me happy. I also enjoy eating and traveling to discover new things. Besides that, I like to lie back, take in the scenery, and relax to enjoy life.